Hamlet HPS01NW User Manual download pdf (Page 24)

Properties – TCP/IP Options

The TCP/IP options allow you to modify the print server’s TCP/IP settings. Each option is

detailed as follows.

Obtain an IP address from a DHCP server:

This option enables or disables the DHCP feature of the print server. When this option is

enabled, the print server will obtain an IP address automatically from the DHCP server on

your LAN. The default value is “Disable”.

Note: 1. Once this option is enabled, the following IP address, Subnet Mask, Gateway will

be grayed out and are not available for editing.

2. While the print server supports DHCP, we strongly recommend you manually

specify a fixed IP address to the print server.

Specify an IP address:

IP Address: This option shows the print server’s current IP address maybe obtained

from your DHCP server or manually specified. This option also allows you

to manually specify an IP address to the print server, if DHCP option is

disabled.

Subnet Mask: This option shows the print server’s current subnet mask maybe obtained

from the DHCP server or manually specified. This option also lets you

manually specify a subnet mask to the print server, if DHCP option is

disabled. This value is optional.

Gateway: This option shows the print server’s current gateway address maybe

obtained from the DHCP server or manually specified. The option also

allows you to manually specify the IP address of the gateway to the print

server, if DHCP option is disabled. This value is optional.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 79 80

No comments

Hamlet HPS01NW User Manual Page 24