Hamlet HPS01NW User Manual download pdf (Page 78)

Reset Button

Reboot the Print server

1. Verify the power of print server is turned on.

2. Press the reset button once, and then release it.

WARNING: This will restart the print server and stop all on-going and pending print jobs!

Perform a Factory Default

1. Disconnect the external power adapter.

2. Hold down the reset button.

3. Reconnect the external power adapter. Wait about 5 seconds.

4. Release the reset button.

5. The print server will restart.

WARNING: This will erase all settings of print server to default and should be performed

with caution!

Print Self-test Page

1. Verify the power of print server is turned on.

2. Press the reset button for 5 seconds, and then release it.

3. Then the self-test page including the factory default settings will be printed.

Note:

1. It is strongly recommended to use Laser Printer for self-test page printing.

2. Some printers are not supposed to print the self-test page completely. For example, the

HP deskjet 948c/895CXi will print the self-test page, but its paper-out LED will light up.

1 2 ... 73 74 75 76 77 78 79 80

No comments

Hamlet HPS01NW User Manual Page 78