Hamlet HPS01NW User Manual download pdf (Page 44)

TCP/IP Setup

1. Click Setup, it then appears the sub-menu.

2. Click TCP/IP, it then as shown in the following picture.

DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a

DHCP/BOOTP server on your network. This option allows the print server to obtain

IP-related settings automatically from your DHCP server.

IP Address: This option allows you to input IP address from the print server. The IP

address must meet the IP addressing requirements of the network segment.

Note: On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.

Subnet Mask: This option allows you to input subnet mask from the print server. The IP

address must meet the IP addressing requirements of the network segment.

Default Router: This option allows you to input gateway from the print server. This IP

address of gateway must meet the router or gateway to go across of the network segment.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 79 80

No comments

Hamlet HPS01NW User Manual Page 44